Jota 28/40

The robustness of this motor allows to be installed in industrial section doors up to 40m / 2. Being quite quiet and compact, it can be applied in almost any type of single-phase or three-phase installations.

Functionalities:

Mechanical safety limit switches.

Setting the maximum working time.

Provide a 3-button eraser (raise, stop or lower).

Automatic closing time setting.

Safety system, for operator and user protection.

Beta

The new robust Beta operator, dedicated to three-phase installations, allows to be installed in quieter environments where its operation does not disturb the quiet of the environment. The detachment system allows it to be installed at different angles.

Functionalities:

Mechanical safety limit switches.

Setting the maximum working time.

Provide a 3-button eraser (raise, stop or lower).

Possibility of installation of transmission kit, for installations of reduced dimensions.

Automatic closing time setting.

Safety system, for operator and user protection.

Jota 40 C/ Variador

Compared to the relay control on the Jota 40, the control of the Jota 40 with variator allows a much smoother and more harmonious movement of the door. It has the possibility of setting speed, acceleration, closing times, among others. It allows the user freedom in the configuration of the automation, always respecting the normal and safe function of it.

The inverter control assembly allows it to be a three-phase motor and of greater power, can be applied in a single-phase installation without wanting any modification in the existing installation.

Tucan 300/400

It is an irreversible electromechanical operator, specially developed for swing gates, advised for intensive use. It uses a position sensor, encoder, allowing the detection of obstacles throughout the course of the gate.

Functionalities:

Memorizing times and forces along the course of the door.

Possibility of installation of security band.

Digital encoder.

Obstacle detection during opening and closing of the gate.

Use of batteries.

Permission of openings up to 110º.

Partial opening.

Relaxation at the staging points.

Gama 300/400/600

Developed for one or two-leaf swing gates, featuring an aluminum reducing body, it makes it a solid and safe product. The unlocked access system with key makes it inviolable and exclusive.

Functionalities:

Memorizing times and forces along the course of the door.

Obstacle detection during opening and closing of the gate.

Relaxation at the staging points.

Apollo 270/360

It is a hydraulic operator specially developed for larger swing gates. This product allows the user to choose between the reversible and irreversible version, in case he wants to install an electric lock.

Functionalities:

Memorizing times and forces along the course of the door.

Internal thermal protection.

Obstacle detection during opening and closing of the gate.

Partial opening.

Relaxation at the staging points.

Kappa

It is a hydraulic operator specially developed for swing gates and recommended for intensive use. This automation has a wide range of different installation dimensions as well as larger opening angles, derived from the motor-gate drive transmission assembly.

Functionalities:

Memorizing times and forces along the course of the door.

Possibility of installation of security band.

Digital encoder.

Obstacle detection during opening and closing of the gate.

Use of batteries.

Permission of openings up to 120º.

Partial opening.

Relaxation at the staging points.

Antares 350/500

It is an irreversible electromechanical operator specially developed for larger swing gates. This automation has a wide range of different combinations of installation points as well as larger opening angles, derived to the motor-gate drive transmission assembly.

Functionalities:

Memorizing times and forces along the course of the door.

Internal thermal protection.

Mechanical travel ends.

Obstacle detection during opening and closing of the gate.

Partial opening.

Relaxation at the staging points.

Twidler

It is a stop operator, where the power package and motor are a single element. This automation requires that it be designed according to the specifications of the location to be installed and user preferences such as the format and the color.

Functionalities:

Memorizing times and forces along the course of the door.

Digital encoder.

Obstacle detection during opening and closing of the gate.

Use of batteries.

Partial opening.

Relaxation at the staging points.

Orion

It is an irreversible electromechanical operator specially designed for swing gates where the site to be installed is not suitable for the common stop system where it is not possible to apply fastening elements to the existing structure. All the automatism is applied in a buried way without compromising its normal functioning.

Functionalities:

Memorizing times and forces along the course of the door.

Internal thermal protection.

Obstacle detection during opening and closing of the gate.

Permission of openings up to 180º.

Partial opening.

Relaxation at the staging points.